REKU prefabricated swimming pools

Composite pools made of FRP

Easy to assemble and chic in design

Fibreglass reinforced plastic (FRP) is a modern composite material in which the synthetic resin epoxy acrylate is reinforced by fibreglass. This combination of two materials unites the advantages of both materials: the high strength of glass and the chemical resistance of epoxy acrylate.

REKU composite pools are therefore waterproof, extremely weather-resistant and insensitive to frost and heat. The particularly light and easily mouldable FRP materials are predestined for swimming pool construction and enable you to enjoy your swimming pool for a long time to come. REKU offers a selection of different prefabricated pools in different sizes and configurations.


Models

TWIN S XTRA

The prefabricated swimming pool in premium quality

The basin body is made of fibreglass-reinforced plastic and has an insulated basin floor made of polyurethane rigid foam with FRP coating. In the walls there are steel reinforcements as well as in the supporting edge for the swimming pool cover. The staircase with five profiled steps on each side allows easy access to the pool. The beach zone and the seating areas between the stairs offer many possibilities for relaxing in different water depths.

The seat step on the opposite front side can be used as an installation shaft for a roller shutter. It can be covered with a step guard made of mesh fabric.

Measurements

Twin S Xtra 800: 8,00 x 3,20 x 1,50 m
Twin S Xtra 900: 9,00 x 3,20 x 1,50 m


MARINA

Prefabricated swimming pool made of epoxy acrylate

4-step bathroom staircase with slip-resistant profiled surface in the corner. Roller shutter safety edge and steel frame are integrated below the roller shutter edge. Basins with 30 mm insulation in the floor and profiles in the side walls.

Measurements:

Marina 600: 6,00 x 3,20 x 1,40 m
Marina 750: 7,50 x 3,20 x 1,40 m
Marina 900: 9,00 x 3,20 x 1,40 m


TWIN

One-piece swimming pool made of epoxy acrylate

Double-sided 4-stage staircase with a generous swimming area in the centre, built-in wall for the installation of counter swimming and massage systems, pool with 6° wall inclination, roller shutter safety edge with integrated steel frame. Basins with 30 mm insulation in the bottom and profiles in the side walls.

Measurements:

Twin 700: 7,00 x 3,20 x 1,50 m
Twin 800: 8,00 x 3,20 x 1,50 m
Twin 745: 7,45 x 3,70 x 1,50 m
Twin 845: 8,45 x 3,70 x 1,50 m
Twin 945: 9,45 x 3,70 x 1,50 m


TWIN „S“

One-piece swimming pool made of epoxy acrylate

5-stage staircase on both sides with generous seating and sunbathing step in the centre, built-in wall for installation of counter swimming and massage systems, pool with 6° wall inclination, roller shutter safety edge with integrated steel frame, pool with 30 mm insulation in the floor and profiles in the side walls. 

Measurements:

TWIN S 700: 7,00 x 3,20 x 1,50 m
TWIN S 800: 8,00 x 3,20 x 1,50 m
TWIN S 745: 7,45 x 3,70 x 1,50 m
TWIN S 845: 8,45 x 3,70 x 1,50 m
TWIN S 945: 9,45 x 3,70 x 1,50 m


TWIN „S“ LOUNGE

One-piece swimming pool made of epoxy acrylate

5-stage staircase on both sides with generous seating and sunbathing step in the centre, built-in wall for installation of counter swimming and massage systems, pool with 6° wall inclination, roller shutter safety edge with integrated steel frame, pool with 30 mm insulation in the floor and profiles in the side walls.

Measurements:

TWIN „S“ 750 LOUNGE: 7,50 x 3,20 x 1,50 m
TWIN „S“ 850 LOUNGE: 8,50 x 3,20 x 1,50 m


MALAGA

Prefabricated swimming pool made of epoxy acrylate

4-stage Roman staircase with slip-resistant profiled surface. Entrance on the left and generous seatingandsunbathing area on the right. Roller shutter safety edge and standing step, steel frame integrated below the roller shutter edge. Basin with 30 mm insulation in the floor and profiles in the side walls.

Measurements:

MALAGA 640: 6,40 x 3,20 x 1,50 m
MALAGA 740: 7,40 x 3,20 x 1,50 m
MALAGA 710: 7,10 x 3,70 x 1,50 m
MALAGA 810: 8,10 x 3,70 x 1,50 m
MALAGA 910: 9,10 x 3,70 x 1,50 m

You will find the individual accessories in the price list.

 

Colours


Colour combinations

The colour of the steps can be the same or optically different from the pool colour. This makes it easier to recognise the steps for safe access.

 

Pool colourWhiteSea blueSandPapyrusGranolith stonegrey
Step colour

white (03)
sea blue (01)
papyrus (17)
sand (11)

sea blue (04)
white (02)

sand (13)
beige (14)
white (12)

papyrus (19)
silver-grey (20)
white (18)

granotith stonegrey (40)

 

NOTE: Only white and sand are largely resistant to chlorine lye. Please disinfect other colours with other disinfectants to avoid bleaching.

Transport

Our special vehicles are equipped with a loading crane. The reach of the crane systems is 13.7 metres for a pool weight of 1000 kg.

It is always possible to unload the swimming pools next to the vehicle. In many cases it is not possible to unload the swimming pools directly into the pit if the construction site is difficult to access or if the distance to the pit is too long. In such cases a regional truck crane is necessary.

Please arrange the details with our disposition in advance. In case of doubt, our drivers may be able to visit the construction site in advance in order to assess the unloading possibility.


Our prefabricated swimming pools

MOUNTING COSTS 

Prices for assembly on the construction site and the required assembly material are not included in this price list. These services are performed by a specialist company and invoiced separately.

TRANSPORT COSTS

The indicated prices are valid "ex works". The transport costs include the freight and insurance up to the accessible property boundary of the consignee. Special costs, such as customs and marginal costs, ferry, etc., shall be borne by the consignee. Transport on the property must be organised by the customer and is also at the expense of the consignee. The use of our truck crane system is not included in the transport costs.

PRICE SETTING

The prices in this list apply only to orders received by us by 31.12.2019. If the goods are accepted later, the list prices valid on the day of delivery will be credited. The prices are sales prices without VAT.

TYPES OF SWIMMING POOLS 

STANDARD – The basin body is available in all colour combinations and also with contrasting coloured steps, with complete equipment package or cut-out set for your built-in parts and also with Integra roller shutter cover. Pool with 30 mm insulation in the floor and structural profiles in the side walls.

CLASSIC – Basins with the same equipment options as "Standard", but fully insulated with 20 mm PU foam in the walls.